محترفو تصنيع الألومنيوم

Your go-to aluminum fabrication experts, providing high-quality solutions tailored to meet your needs and budget. Our skilled team guarantees top-notch workmanship on every project.

Curtain Wall

Application: Curtain Wall Glazing System
Weather Resistance: Designed to resist air pressure and water infiltration while providing an effective thermal barrier between the building’s interior and exterior
Lighting: Allows greater penetration of natural light into interior spaces
Drainage System: Fully integrated internal drainage system designed to perform under the most severe climatic conditions
Profile Dimensions: Starting from 5 cm in width, 10 cm in depth, and 1.8 mm in thickness
Fixing Method: High-quality silicone from trusted international suppliers is used to ensure outstanding flexibility and durability
Screws: Concealed upon installation and resistant to corrosion
Surface Protection: Aluminum surfaces are protected with a plastic film to prevent scratches during transportation and installation
Ventilation Openings: Push-Out openings can be added upon client request
Glass Type: Double-glazed glass with a total thickness of 28 mm (6 mm inner glass + 16 mm air gap + 6 mm outer glass)
Color Options: Available in a variety of colors with thermoset powder coating

Slide - C12

Profile Base: 10.7 cm in width, 3.9 cm in height, with thickness ranging from 1.5 mm to 3.5 mm
Double Brush Seal: Designed with a central plastic strip to improve resistance to weather conditions
Internal and External Drainage Channels: Engineered to prevent water buildup and ensure efficient drainage to the outside
U-Shaped EPDM Gasket: Installed around the glass for secure fixing and effective protection against air and water infiltration
Teflon Rollers: Mounted on specially designed bases to minimize friction and provide smooth sliding performance
Silica Gel Granules: Inserted within the double-glazed unit to absorb moisture and help prevent condensation

Plastic Pads and Bottom Sash Brushes: Help reduce friction while blocking air and dust infiltration
Plastic Covers: Protect and conceal the upper and lower sections of the sash profiles
Imported Accessories: Spanish (STAC) and Italian (LAVAAL) components
Glass Type: Double-glazed glass with a total thickness of 24 mm (6 mm inner glass + 12 mm air gap + 6 mm outer glass)
Dust Barrier: Fitted with a high-resistance fabric dust barrier for enhanced durability and protection
Color Options: Available in a variety of colors with thermoset powder coating

Slide - C16

Profile Base: 13.5 cm in width, 4.63 cm in height, with thickness ranging from 1.4 mm to 2.8 mm
Double Brush Seal: Designed with a central plastic strip to improve resistance to weather conditions
Internal and External Drainage Channels: Engineered to prevent water buildup and ensure efficient drainage to the outside
U-Shaped EPDM Gasket: Installed around the glass for secure fixing and effective protection against air and water infiltration
Teflon Rollers: Mounted on specially designed bases to minimize friction and provide smooth sliding performance
Silica Gel Granules: Inserted within the double-glazed unit to absorb moisture and help prevent condensation

Plastic Pads and Bottom Sash Brushes: Help reduce friction while blocking air and dust infiltration
Plastic Covers: Protect and conceal the upper and lower sections of the sash profiles
Imported Accessories: Spanish (STAC) and Italian (LAVAAL) components
Glass Type: Double-glazed glass with a total thickness of 28 mm (6 mm inner glass + 16 mm air gap + 6 mm outer glass)
Dust Barrier: Fitted with a high-resistance fabric dust barrier for enhanced durability and protection
Color Options: Available in a variety of colors with thermoset powder coating

Slide - C20

Profile Base: 14.9 cm in width, 4.75 cm in height, with thickness ranging from 1.5 mm to 2.8 mm
Double Brush Seal: Designed with a central plastic strip to improve resistance to weather conditions
Internal and External Drainage Channels: Engineered to prevent water buildup and ensure efficient drainage to the outside
U-Shaped EPDM Gasket: Installed around the glass for secure fixing and effective protection against air and water infiltration
Teflon Rollers: Mounted on specially designed bases to minimize friction and provide smooth sliding performance
Silica Gel Granules: Inserted within the double-glazed unit to absorb moisture and help prevent condensation

Plastic Pads and Bottom Sash Brushes: Help reduce friction while blocking air and dust infiltration
Plastic Covers: Protect and conceal the upper and lower sections of the sash profiles
Imported Accessories: Spanish (STAC) and Italian (LAVAAL) components
Glass Type: Double-glazed glass with a total thickness of 32 mm (6 mm inner glass + 20 mm air gap + 6 mm outer glass)
Dust Barrier: Fitted with a high-resistance fabric dust barrier for enhanced durability and protection
Color Options: Available in a variety of colors with thermoset powder coating

Hinge - CH

Fixed Profile Section: 5.5 cm in width and 4.2 cm in height
Sash Profile: 5.2 cm in width with a Z-shaped design, and 8.2 cm in height
Central Mullion Profile: 4.2 cm in height with a T-shaped design
Water Drainage System: Integrated water drainage outlets and plastic covers across the full profile section
EPDM Gasket: Ensures smooth and reliable opening and closing performance
Aluminum Thickness: Ranges from 1.5 mm to 1.8 mm
Turn & Tilt System: Offers both opening and tilting functions based on client requirements, operated through an Italian-made mechanism by LAVAAL
Accessories: Premium international accessories from Spanish brand STAC and Greek brand DOMUS
Glass Thickness in Fixed Sections: 21 mm double glazing (6 mm inner glass + 9 mm air gap + 6 mm outer glass)
Glass Thickness in Operable Sections: 21 mm double glazing (6 mm inner glass + 9 mm air gap + 6 mm outer glass)
Color Options: Available in a variety of colors with thermoset powder coating

Luxurious Slide - CL 62

Panoramic double-track sliding door system, suspended on a concealed track

Panoramic double-track sliding door system with an exposed track

Structural design with a concealed frame for a sleek, modern appearance
Thanks to the insulated wall design and concealed profiles, the door sashes slide smoothly within the frame, creating an elegant architectural look and a true sense of spaciousness and limitless openness.

Fixed and movable dust seals: Provides a natural closure and clear visibility through a single pane of glass, with a unique architectural design, ease of cleaning, and high resistance to wind pressure.

Ultra-slim design for greater strength and stability
The reinforced 5 mm ultra-slim hook system features an integrated subframe for better wind resistance, combining elegance, durability, and safety.

5.0 mm
The ultra-slim hook wall combines slimness and durability.

3.0 mm
The ultra-slim hook subframe wall combines slimness and durability.

26 mm
The ultra-slim hook surface provides a sleek and elegant appearance.

Durable lift tracks for smooth operation
When the door sash is fully closed or open, the track lifter automatically rises to align flush with the bottom track surface.

Motorized upper track
The advanced in-house motor system ensures quiet, stable performance, smooth movement, proven reliability, and long-lasting quality.

Features

echnical standards and product specifications:

Visible vertical mullion: 21.5 mm
Visible frame face width: 40 mm
Thermal insulation strips: PA66 nylon thermal break strips
Glass: 8 + 24 + 8 double-glazed tempered insulated glass
Accessories: High-performance metal rollers